Equipment and Cleaning
Cotton Tipped Applicators
for testing inks
• approved
• 100 pcs of each 6 inch long
• ideal for handling from large glass bottles
• for single use on dirty surfaces
Test Light
For use in case of low contrast between measuring surface and test ink. e.g. dark plastic / dark ink
• 2.4 inch long
arcotestCLEANER
is a solution based on ethyl alcohol. It serves to improve cleanliness on various surfaces such as metals, glass and plastics. With arcotestCLEANER, tested parts can also be reused by wiping off the test ink. Given the different composition of surfaces, a suitability test should be carried out before each application.
- better cleanliness through surface cleaning
- cleaning solvent system based on ethyl alcohol
- no unpleasant odour
- dries very quickly
- can clean and possibly increase adhesion strength
- in one step easy removal of the applied test inks
- available in 250 ml aluminium bottles
Big case
For transport and storage
• upright standing of the bottles during use
• for 24 test ink bottles à 10 ml
• without content
Small case
For transport and storage
• upright standing of the bottles during use
• for 7 test ink bottles à 10 ml, with separate storage for test pens 4 or cotton tipped applicators
• without contents
arcotest® ORGANIC transport case
Our arcotest® ORGANIC transport cases, small have been newly developed.
In the production of our green cases, we have completely dispensed with the use of petroleum.
It consists of 93% renewable raw materials such as glucose, natural waxes, minerals, as well as natural fibers.
The case is completely recyclable.
for 7 test ink bottles of 10 ml,
with separate storage for test pens 4 or cotton tipped applicators
without content
arcotest® ORGANIC
case SET 8-piece
Case content:
• ORGANIC set 32 – 44 mN/m
• cotton tipped applicators
arcotest® PINK
case SET 9-piece
Case content:
• PINK set A 32 – 44 mN/m without brush
• arcotestCLEANER 250 ml
• cotton tipped applicators
arcotest® BLUE
case SET 9-piece
Case content:
• BLUE set A 28 – 56 mN/m without brush
• arcotestCLEANER 250 ml
• cotton tipped applicators
art. no. 40.00000.8
arcotest® Plasma Set
The arcotest® Plasma Set contains the handheld plasma device piezobrush® PZ3 for manual surface treatment with atmospheric pressure plasma and an arcotest® OPTIONAL set of 4 consisting of 4 test pens à 5 ml of your choice.
The set also contains two different modules. The Module Standard is for the treatment of non-conductive materials such as plastic. The Module Nearfield, on the other hand, is used to treat conductive materials such as stainless steel or CFRP.
The arcotest® plasma set includes:
- arcotest® OPTIONAL set of 4 consisting of 4 test pens à 5 ml of your choice
- Plasma-Hand-held device piezobrush® PZ3 inkl. Ventilation system, power supply and cables
- Standard module
- Modul Nearfield
Detailed product information can be found on the product page from the manufacturer relyon-plasma
The arcotest® plasma set was developed as a compact handheld plasma device for use in laboratories, pre-development and the assembly of small series. With a maximum power consumption of 18 W, the Piezoelectric Direct Discharge (PDD®) technology is used to generate cold-active plasma at a temperature of less than 50°C. At the heart of this portable plasma device is the TDK CeraPlas™ piezo plasma generator – a high-voltage discharge device for generating cold atmospheric pressure plasma. Atmospheric pressure plasma is used to efficiently increase the surface energy on many materials and to reduce germs and odours.
Application examples:
- Activation and functionalization of surfaces of various base materials
- Improvement of the wettability
- Optimization of gluing, painting, printing and coating processes
- Surface treatment of plastics, glasses, ceramics, metals, semiconductors, natural fibers and composite materials
- Fine cleaning and odor reduction
